This is custom script. Do not install updates.
Parametric Search Appliance
| <<Previous: Require HTTPS for Proxy | ↑Up: System Wide Settings | Next>>: HTTPS/SSL Protocols |
This controls what IP addresses are allowed to access the admin interface. You may specify one or more individual IP addresses or networks. Networks may be specified with either glob, address:netmask, or address/prefixlen syntaxes. Place each entry on a line by itself. Blank means no IP restriction, the admin interface may be accessed from any IP (with proper credentials).
Example. If you have a local class C network of 10.10.1.0
as well as one public IP such as 198.49.220.1 you want to have admin access
you would use
10.10.1.*
198.49.220.1
or
10.10.1.0/24
198.49.220.1
or
10.10.1.0:255.255.255.0
198.49.220.1
If the request is forwarded such that a X-Forwarded-For header is
included (like a load balancer), all IPs through the forwarding chain must be
allowed by Admin Access IPs.
For safety, The Parametric Search Appliance will only accept new Admin Access IPs
values that allow the IP address it's currently being accessed from.
| <<Previous: Require HTTPS for Proxy | ↑Up: System Wide Settings | Next>>: HTTPS/SSL Protocols |